What are the structures, processing procedures and characteristics of the opener and combing machine?

The carding machine in the opener is an ideal equipment for combing old sweaters, wool, cotton, wool, hollow fibers and old cotton wool. This machine is convenient and fast, and is equipped with a dust suction device, which effectively guarantees the health of the operator; fast: one-time molding eliminates the tedious and expensive labor; safety: the protective cover of the machine ensures the safety of the operator. Opener carding machine structure: 1. Opener: automatic cotton feeding curtain-drum-licker-in roller-dust cover-garbage plate-motor-reducer-dust removal equipment Loosening machine principle: mainly used for loosening of materials such as fiber, cotton, and textiles. Large entangled fibers can be loosened into small pieces or bundles by tearing. At the same time, it has the function of mixing and removing impurities during the loosening process. 2. Carding machine: wall frame, feeding curtain, feeding roller, licker-in roller, roller, working roller, transfer roller, doffer, shredding and stripping mechanism, dust removal fan, ash hopper, cotton roll machine, power distribution cabinet, safety cover. Rollers, doffers, drums, working rollers, and transfer rollers are all dynamically balanced; the racks of the licking rollers are tightly matched with the grooves, and the two sides of the drums, working rollers, transfer rollers, and doffers are close together. The soldering at both ends is firm and does not fall off. The operation is safe and reliable. Principle of the carding machine: It is mainly composed of the pre-carding opening system, the main carding system, the condensation output system, and the carding web system. Opening machine carding machine process: Clean the processed fiber/cotton/wool, remove metal and debris, and evenly (not too thick) spread it on the feeding curtain to achieve automatic feeding; the feeding curtain sends the fiber/cotton to the roller mouth, and the roller squeezes the fiber to the front of the winder, and the winder hook pulls the fiber away. Due to the centrifugal force of the feed port, impurities will be thrown out along the tangent direction of the feed port. After the fiber is repeatedly transferred, combed, and mixed evenly by the drum, working roller, and transfer roller, it is stripped by the doffer through the stripping mechanism to output a paper-thin fiber cotton layer; put a bamboo pole or steel pipe on the cotton pressing cylinder to assist in pushing and pulling, and automatic cotton rolling can be achieved. The formed cotton roll can be gently pulled on the running cotton roll with both hands, and shaken with the output of the cotton roll. The output width of the cotton can be controlled arbitrarily. The output cotton roll can be placed on the cotton laying board and gently shaken to achieve the required length and width. Features of the opener and carding machine: The advent of this new type of elastic needle carding machine solves the problems of the thickness of the elastic needle of the elastic needle carding machine, interlaced cotton, uneven cotton yarn, large vertical tension of the carding machine, and no horizontal tension. After repeated tests by the R&D team, the vertical and horizontal tensions are more balanced, the cotton yarn is more flexible and durable; and the formability of the cotton batt is enhanced. This machine can: elastic cotton batting, ancient cotton, chemical fiber, wool, open wool cotton, etc. It has the advantages of fine poppy, good impurity removal, fine cotton production, fast speed, and labor saving. The research results of this undergraduate program have been applied for a national patent.