What are the precautions for using a flowering machine? It will be too late if you don't know it!

I believe everyone has heard of "cotton fluffing". The cotton fluffing machine used for cotton fluffing is a machine that has been widely used in recent years. The cotton fluffing machine can not only fluff cotton, but also perform some fiber separation, etc. In recent years, the frequency of use of the cotton fluffing machine is very wide. Below, let us learn about the use of the cotton fluffing machine together, hoping to help you. Use of the cotton fluffing machine: 1. The beating speed of the cotton fluffing machine directly affects the intensity of the beating on the cotton layer. When the cotton feeding method is fixed, the speed of the cotton fluffing machine is high, and the cotton opening and impurity removal effect is good. However, if the speed is too high, the impurities are easily broken, and it is easy to swing the white cotton or tighten the cotton bundle, which reduces the impurities in the cotton fluff. When processing raw materials with long fibers, few impurities or low maturity, a lower beating degree is usually used. 2. The distance from the cotton fluffing machine to the cotton fluffing machine cotton roller affects the tearing force of the cotton fluffing machine blade to penetrate into the cotton layer. The smaller the distance, the better the opening effect, but if it is too small, it will not damage the optical fiber. The A036 porcupine cotton opener is suitable for spinning cotton fibers below 31 mm. The spacing is 6mm and cannot be adjusted. When processing chemical fibers, the contrast distance is 11 mm. 3. The interval from the flower machine to the dust collecting bar gradually becomes looser, the volume increases, and the interval from the entrance to the exit gradually becomes larger. When the spacing is small, the chance of the cotton block being blocked by the dust bar will increase, and the amount of lint will also increase. On the contrary, when the spacing is large, the lint is reduced. Generally speaking, medium-sized yarn is spun with an entrance spacing of 10~12 mm and an exit spacing of 17~18.5 mm. Since this distance is not easy to adjust, it is generally not adjusted when the properties of the raw cotton do not change much. 4. The distance between the flower machine and the cotton stripping knife should be smaller, generally 1.5~2 mm. If it is too large, the flower machine is easy to return the flower and spit silk. At the dust collecting box, the spacing is smaller because the airflow increases more and the impurities decrease. It should be pointed out that in some industries, due to different machine structures, combined with air comb control, the dust bar spacing from the entrance to the exit is also configured in three sizes: large, small, and large.