What should we pay attention to when transporting flowering machines?

The flowering machine is mainly used to loosen fibers, cotton, textiles and other materials. By tearing, large pieces of tangled fibers are loosened into small pieces or bundles. At the same time, the loosening process is accompanied by mixing and removing impurities. So do you know what you need to pay attention to when transporting the flowering machine? 1. Pay attention to the packaging of the flowering machine equipment during transportation. Before shipment, it should be packaged in a safe way according to its nature, transportation distance, road conditions along the way, etc. The packaging needs to be firm and tight, and clear, standardized and easy-to-identify signs should be made on the packaging. 2. Pay attention to the loading and unloading of large-volume flowering machine equipment. The roads, lights, signs, fire-fighting facilities, etc. at the loading and unloading site need to meet the conditions for loading and unloading. When loading and unloading flowering machine equipment, the car should be parked in the open air, and the loading and unloading workers should pay attention to their own protection and wear protective equipment. Strictly abide by the operating procedures, load and unload lightly, and it is strictly forbidden to drop, hit, roll over, press and invert. Goods that are afraid of moisture should be covered with tarpaulins, and the goods should be stacked neatly and tied firmly. 3. Pay attention to fire prevention when transporting large items on highways. Avoid fire when transporting dangerous goods. When loading and unloading flowering machine equipment, tools that do not produce sparks should be used. Smoking is strictly prohibited in the car. Vehicles must not be close to open flames, high-temperature places, and places exposed to the sun. Tank trucks carrying petroleum should install ground wires when stopping and loading and unloading. When driving, the ground wire should touch the ground to prevent static electricity from causing fire. 4. Pay attention to driving when planning transportation plans. Vehicles carrying flowering machine equipment should be equipped with signs specified in GB13392-92 "Signs for Road Transport of Dangerous Goods Vehicles". Car operation strictly abides by traffic, fire protection, public security and other regulations. The speed should be controlled, the distance from the vehicle in front should be maintained, and emergency braking should be avoided in case of any situation. Overtaking in violation of regulations is strictly prohibited. 5. Pay attention to parking when transporting factory relocation. Vehicles loaded with flowering machine equipment must not be parked in schools, institutions, markets, places of interest, and scenic spots. If loading and unloading operations or temporary parking are required in the above-mentioned areas, protective measures should be taken and the consent of the local public security department should be obtained. When parking, someone should be left to watch over the vehicle, and no idle personnel are allowed to approach the vehicle, so that the vehicle is kept away from danger. In short, different structures have obvious differences in the effects of opening, mixing, and removing impurities. Therefore, different forms of flowering machines should be used on production lines with different requirements. Therefore, special attention should be paid to the flowering machine during transportation.