What is the operating principle of the flowering machine? What is its main purpose?

The flowering machine is an important equipment in the cotton textile industry. With the development of emerging industries, the equipment is also developing continuously, and its application range is getting wider and wider, in addition to non-woven flowering and cotton flowering. The equipment can also produce commonly used white flowering materials. Next, we will summarize the working principle and main uses of the equipment in detail. Before entering the flowering machine, the cotton layer can be effectively maintained so that the cotton layer can be preliminarily combed under the action of the equipment. There are many kinds of feeding rollers and feeding devices, which can be selected according to your needs. When the amount of wool in the cotton storage box of the opener reaches the set value, the corner nail curtain stops running, that is, the cotton supply stops, the electronic control device sends a signal, the cylinder runs to open the cotton storage box, and the fiber falls on the conveyor chain of the rough opener under the action of gravity, and circulates in turn. In this process, the fiber is preliminarily opened, and the fiber is preliminarily mixed under the action of the transmission curtain, corner nail curtain and cotton roller in the opener. The compacted raw materials need to be opened first, and then turned into fine cotton bundles by the opener to remove impurities and defects and mix evenly. Opening, cleaning and mixing are interrelated, and opening is the prerequisite for impurity removal and mixing. Only by opening the fibers into small cotton bundles and further opening them into single fibers can impurities be better removed and fully mixed. On the one hand, the cleanliness of impurity removal is an indicator of the effectiveness of the performance of the flowering machine. For many impurities in related non-woven fabrics and cotton, how many percent can be removed? Different models of equipment are different, so this is the first aspect to consider when purchasing. The flowering equipment itself consists of several dust-proof rods to form a fence-like protective net. After the non-woven fabric enters and is hit by the high-speed beater, the impurities will be quickly separated and thrown out through the fence net, while the other outlet is pure fiber material. However, if used with a stapler, the impurity removal effect can be achieved. The flowering machine process has a variety of spinning raw materials and different fiber properties and impurities, so the opening process of the raw materials is also different. In cotton spinning, the opening of raw cotton is an independent process, which is carried out on an opening and washing machine. When the raw cotton is opened, additional functions such as mixing, impurity removal, and dust removal are generated. In wool spinning, the opening of raw wool is often combined with wool washing, drying, and blending, using a washing and drying combination machine and a wool blending machine. In silk spinning, the opening and removal of impurities from refined cotton are carried out during the cotton making process.