What factors affect the opening effect of the opening machine?

When the opening machine is opening, what factors affect the opening effect? ​​As an opening machine manufacturer, let the editor take you to learn together! 1. The spacing between the needle teeth of the feeding roller and the licker-in roller: This spacing should be determined according to the length of the fiber of the opening machine. If the length of the spun fiber is long, then the spacing can be larger; if the length of the spun fiber is short, then the spacing should be smaller. The specific spacing should be controlled according to the length of the fiber and production experience. 2. The speed of the licker-in roller: In production, if the speed of the licker-in roller is very fast, the number of times the feeding raw material is opened per unit length increases, and the opening force also increases accordingly, so the opening effect is enhanced. However, as the speed of the licker-in roller increases, the fiber is easily torn apart during the high-speed rotation of the licker-in roller. Therefore, in the process of opening, especially when the fiber block is large and the opening resistance is large, the speed of the licker-in roller should not be too large. 3. The speed of the fan: The speed of the fan should be properly selected. If it is too fast, the fiber block will be sucked away by the fan before it can be opened; if it is too slow, the fiber cannot be transferred in time and is easily rubbed into fiber blocks. 4. The state of the needle cloth of the licker-in roller: The needle cloth of the opening machine must be very sharp so that it can pierce the fiber well and enter the fiber for opening. The needle teeth must be smooth and the needle surface must be flat and wear-resistant to prevent the fiber from hooking and entangled on the needle tip, which cannot be transferred well. The above is the relevant content of the opening machine, I hope it can help everyone. If you want to know more about the opening machine, please pay more attention to our dynamics!