What are the maintenance methods to ensure the long-term use of the opener?

We all know that the opener equipment needs to be optimized regularly to ensure the stability of operation. Therefore, in addition to strengthening supervision of relevant personnel, the maintenance of the machine is very important. Let's learn how to optimize the equipment. In the cleaning work of the opener, it is necessary to open the protective cover of the pressure surface of the machine, open the control cabinet, and do a good job of cleaning. Usually, the hair in the electromagnetic brake should be cleaned, and the oil stains around the pedal box should also be cleaned, and the hair in the control cabinet should be removed. When inspecting the equipment's yarn equipment and supporting device, remove the accumulated hair next to the yarn, and check the guide needle and yarn guide to keep it smooth. When inspecting the equipment, be sure to check the shedding of the screws. When the opener is running the mower, it must wait until the equipment is running normally before continuing to even the mower. During the work process, the condition, sound and bearing temperature of the motor should be observed in time. During the work process, the staff should tie the sleeves of the clothes tightly and wear masks and work hats. When the raw materials of the mowing machine are used, it is necessary to carefully check whether there are any hard objects in the raw materials to avoid causing damage to the equipment and personal health. When solving equipment problems, wait until the engine stops before proceeding. The manufacturer recommends that the opener be inspected as necessary. During the inspection, carefully check whether the side supports of the machine are bent or damaged. Since the system has high requirements for the installation specifications of the side supports, of course, if the side supports are damaged or the parts are not installed properly, it will affect the entire working process of the machine. Therefore, it is necessary to do a good job of machine inspection and maintenance, which is also a process of repairing the equipment. The above is some machine optimization knowledge and methods that our Xinjinlong Machinery opener manufacturer has summarized for everyone. If you also want to cut, crush, open and separate chemical fiber soft raw materials, welcome to our factory for consultation and inspection of the opener.