Uncover the daily cleaning, maintenance and operation of the opener

In the textile raw material processing industry, the opener is an indispensable equipment. It is mainly used for the loosening of textile raw materials. Therefore, the daily cleaning and maintenance of the equipment is directly related to the future product output and quality. Therefore, in addition to strengthening employee management, it is very important for manufacturers to regularly maintain the equipment. Today, Jinan Xinjinlong Machinery will explain its daily maintenance skills in detail. In the cleaning work of the opener, open the pressure surface protective cover of the equipment, open the control box, and do a good job of cleaning, mainly cleaning the flowers and hair in the electromagnetic clutch, and the oil stains around the tread box. It is necessary to clean the flowers and hair in the control box. When checking the yarn device and tension device of the equipment, the flowers and hair accumulated on the edge of the yarn should be removed, and the guide needle and yarn guide should be checked to ensure that they remain smooth. When checking the equipment, check whether the screws are loose. Operation steps of the opener: 1. When the opener starts to feed the crop, it must wait until the machine is running normally before feeding it continuously and evenly. 2. During the operation, the condition, sound and temperature of the motor should be observed at any time. 3. The staff should tie their clothes and sleeves tightly and wear masks and work hats during the work process. 4. When feeding the raw materials, be sure to check whether the raw materials contain hard objects to avoid damaging the machine and affecting personal safety. 5. When dealing with machine problems, wait until the engine stops before proceeding. The manufacturer recommends regular inspections of the opener. During the inspection, carefully check whether the side supports of the equipment are bent or damaged. Because the side support assembly specifications of the equipment are relatively high, if the side supports are damaged or the position is not assembled in a standardized manner, it will affect the operation of the equipment. Therefore, it is necessary to do a good job of equipment inspection and maintenance, which is also a process of maintaining the equipment. If you need to cut, crush, loosen and separate various fiber soft materials, or purchase flower machines, openers and other equipment, please visit our website for consultation.