The manufacturer explains the daily cleaning, maintenance and operation of the opener

In the processing industry of textile raw materials, the opener is an indispensable equipment. As a large impurity removal machine, the machine is mainly used to loosen textile raw materials. Therefore, the daily cleaning and maintenance of the equipment is directly related to the later product output and quality. Therefore, in addition to strengthening the management of the staff, the manufacturer is very important for the regular maintenance of the equipment. Today, Jinan Xinjinlong Machinery will explain its daily maintenance skills in detail. In the cleaning work of the opener, it is necessary to open the protective cover on the pressure surface of the equipment, open the control box, and do a good job of cleaning. The main thing is to clean the hair in the electromagnetic clutch, and the oil stains around the pedal box should also be cleaned. The hair in the control box needs to be cleaned. When checking the leno device and tension device of the equipment, remove the hair accumulated on the leno edge, and check the guide needle and yarn guide to keep it smooth. When checking the equipment, check the looseness of the screws. Operation steps of the opener. 1. When the opener starts to feed crops, it must wait until the machine is running normally before feeding continuously and evenly. 2. During the operation, the condition, sound and bearing temperature of the motor should be observed at any time. 3. During the work process, the staff should tie their clothes and sleeves tightly and wear masks and work hats. 4. When feeding raw materials, be sure to check whether the raw materials contain hard objects to avoid damaging the machine and affecting personal safety. 5. When dealing with machine problems, wait until the engine stops before proceeding. The manufacturer recommends regular inspections of the opener. During the inspection, carefully check whether the side supports of the equipment are bent or damaged. Because the requirements for the assembly specifications of the side supports of the equipment are relatively high, if the side supports are damaged or the position is not assembled in a standardized manner, it will affect the operation process of the equipment. Therefore, it is necessary to do a good job of inspection and maintenance of the equipment, which is also a process of maintaining the equipment. If you need to shear, crush, open, separate various fiber soft materials, or purchase openers, flower machines and other equipment, please visit our website for consultation. If you want to learn more about the equipment, please pay attention to our website dynamics, and we will continue to push relevant content for you.