Maintenance skills and analysis of opener equipment

The opening machine is a kind of equipment with high frequency of use and long operation time. No matter what kind of equipment is used, it should be maintained diligently in daily use, especially for such long-term operation equipment. Today, Jinan Xinjinlong Machinery will analyze the maintenance skills and analysis of the equipment for everyone. The opening machine can clean out impurities in cotton fabrics through the centrifugal force generated by the high-speed running licker-in roller. The equipment's beating effect can be either held or hit freely. After holding and hitting, the fiber layer will vibrate and deform, and then it will be decomposed into many smaller fiber blocks. Generally, it is pulled loose first and then beated. After beating, the fiber blocks can be broken down into smaller pieces, so that some fine impurities can be handled, and the structure of the semi-finished products can be improved. Fiber products can be processed, such as old quilt covers, waste yarn, linen, etc. The opening equipment can separate the fiber raw materials entangled together and remove the impurities contained. This not only saves the materials of fiber products, but also facilitates the secondary use of fiber products. Equipment maintenance of the opening machine The opening machine is commonly known as the "beater". The rotation of the equipment is very high, so that the fiber blocks can be further decomposed and impurities can be removed. With this kind of equipment, a lot of labor is saved, but no matter what kind of equipment is used, it needs maintenance and care. If it is not properly maintained and cared for, the use time of the equipment will be shortened and its subsequent use effect will be affected. Its sliding bearings and tensioning sprockets should be maintained daily, and some mechanical oil should be used every day. The chain also needs to drip some oil, so that there will be an oil film. When a new equipment is first used, it is necessary to lubricate each part first. After being placed for a long time, the reducer needs to be cleaned and the oil changed. The above is an analysis of the maintenance skills of the opener equipment, I hope it can be helpful to everyone. If you want to know more about the product knowledge of the flower machine, please pay attention to our website dynamics and look forward to your consultation.