Introduction to the working principle and maintenance methods of the carding machine!

As a process in the textile process, textile machinery has brought great convenience and improved work efficiency to the textile industry. As we all know, the carding machine is a home textile machine that combs the preliminarily processed spinning raw materials into a single fiber state, forms a thin layer of mesh fibers, and then arranges them into fiber strips. In order to understand the working principle of the carding machine, we must first understand the composition of the carding machine. The carding machine is generally composed of the following three parts: pre-combing part: mainly: cotton feeding roller, cotton feeding plate, dust removal knife and small funnel bottom, etc.; main combing part: mainly including cylinder, cover plate and large funnel bottom, etc.; strip forming part: mainly including cotton thread roller, bell mouth and coiling machine, etc. The basic working mode of the carder is as follows: the surface of the pre-carded cotton feeding roller has axial straight grooves, and pressure devices are installed at both ends, which are closely matched with various components, plus dust collectors and leaking bottoms to remove impurities and short fibers, and then enter the main combing part. The cylinder and doffer are hollow cylinders with needle cloth on the surface. The cylinder has a larger diameter and is the main body of the whole machine. The cylinder is also the main component of the main combing part. Through various chain transmissions, it plays a role in combing in turn. There is also an important step in combing, which is to remove the fine impurities remaining in the cylinder. There are usually two situations for the maintenance of the carding machine: First, the maintenance of the carding machine is generally carried out step by step. This is usually a maintenance that is normally operated without any major problems. This maintenance generally refers to the maintenance cycle of mechanical traditional textile equipment, which is to carry out large and small repairs, scrubbing and various repairs on the equipment according to the prescribed cycle. Regular maintenance to ensure the normal operation of the equipment is to ensure the normal operation of the equipment. Second, for parts that are easy to wear, regular maintenance is required, and timely adjustments should be made. The consumable parts of modern carding equipment were generally imported in the past, but now the quality of domestic and imported parts is very good, so we only need to regularly check the working condition of the carding machine and pay attention to the consumable parts of the equipment and parts so that we can deal with them in time when there is a situation. We need to do one prevention and two preventions for the management of the carding machine. Of course, the same is true for other textile equipment, such as cotton feeding boxes, cleaning boxes, etc. Then this article ends here. You can find that it has a high use value for the textile industry. It is not only convenient, but more importantly, it effectively promotes the improvement of work efficiency in the textile industry, and has an important connection with the opening machine! .