Introduce the characteristics of the opener and related maintenance work

Equipment maintenance is an important measure to extend the service life of the equipment. Among them, the opening machine is a common equipment in the textile industry, and its appearance saves a lot of labor. However, for this kind of equipment with high utilization rate, some people still do not know how to maintain it, which will seriously affect the use effect. Today, Jinan Xinjinlong Machinery will introduce its characteristics and related maintenance work to you. The flowering machine is a machine used to open a variety of materials such as chemical fiber, fiber, cotton, wool, and rags. The equipment contains a number of spinnable fibers. Different structures make the flowering effect and impurity removal effect different, so different methods are used for different requirements. The flowering of raw cotton in cotton spinning is an independent process, which is stopped on the opening and cleaning combined machine; the equipment consists of a feeding roller or a feeding roller and an opening cylinder. The opening cylinder is equipped with corner nails and combing needles for careful opening. The cylinder can be equipped with rollers and stripping rollers. The curvature of the dust grid of different flowering machines, the number of dust rods, and the spacing of the dust rods are also different. They are used according to the nature of the raw materials and processing requirements; cotton spinning processing raw cotton is first The process of beating after loosening, early dropping and less breaking, increasing the number of blows within a certain range, improving the quality of opening of fiber raw materials, the fiber raw materials are slowly fed in a gripping shape and hit by the high-speed rotating beater, one part of the loosened fiber raw materials is input into the machine with the corner nail curtain, and the other part is knocked down by the cotton roller, and then brought back between the two through the corner nail curtain, and repeated loosening is stopped; in wool spinning, the opening of raw wool is combined with wool washing, wool drying, and wool, and the opening, washing and drying combined machine and wool mixing machine are used to combine the opening and cleaning machinery and configuration process according to the principle. The daily maintenance of the opening machine includes: 1. Add a few drops of mechanical oil to the sliding bearing and tensioning sprocket every day. 2. Add a few drops of oil to the chain every shift to maintain an oil film. 3. For the square cloth eating flower rod, add oil twice per shift. 4. Add an appropriate amount of oil to the reducer, and it is better to bring oil to the large gear when turning by hand. 5. Clean and change the oil every six months, and open the small top cover frequently to check the oil storage in the box. 6. When using a new cotton popping machine for the first time, lubricate every part first. 7. When using it again after a long period of storage, it is necessary to clean the reducer and change the oil. The above is a detailed explanation of the maintenance work of the opener. If you want to know more about the knowledge of the opener, please pay attention to our website dynamics. We will continue to push relevant product content to you and look forward to your consultation.