Flowering machine maintenance steps and maintenance methods introduction

Economic progress has promoted the sustainable development of the industry. As we all know, there are all kinds of equipment in the industry, including flowering machines. Failures will occur after a long period of use, and flowering machines are no exception. So how much do you know about machine maintenance methods? Pay attention to our maintenance methods and steps: Flowering machine maintenance method: First check whether the socket, plug and power cord are lacking in oxygen. If there is a lack of oxygen, it should be inserted into the machine; if there is no lack of oxygen, it should be inserted into the motor; if there is no lack of oxygen, a certain external force should be applied to the motor (it should not be used by hand), gently move the wheel so that it cannot turn, and the recycled cotton may block the motor. In this case, it is usually necessary to clean the engine after shutdown or power outage. Another situation is that it does not rotate, external force can be applied, but there is a weak current inside the motor, which is caused by a slight leakage of the starting capacitor. If the current noise is too large and the motor cannot start at all, it can be concluded that the starting capacitor is short-circuited. Flowering machine maintenance steps: 1. First check whether the bearing is well lubricated: lubricating oil must be added frequently and lubricated. 2. Check the tightness of all fasteners. Check whether the drive belt is installed correctly and in good condition. If the drive belt is damaged, it must be replaced in time. When the transmission belt or pulley is oily, please wipe it with a clean cloth in time. 3. Check whether the protective facilities are intact. If the protective facilities are found to be defective, eliminate them in time. 4. Check whether there are materials or other debris in the damaged cavity, and remove them occasionally. Prevent fire and avoid unnecessary losses. 5. Check the fixing screws of the frame and the machine regularly. So the above is the maintenance method and maintenance steps of the flowering machine. I hope you can refer to it. However, I still want to remind everyone that if you develop good habits in your daily life, it will be of great help to the later use of the flowering machine!