You may not know that the application range of flower machines is so wide!

Flowering equipment is the main machine for loosening fiber materials. Common cotton and other fiber silks are loosened by flowering equipment. Fiber materials are difficult to handle. It is difficult to disassemble them after tying knots. Flowering equipment can loosen fiber materials. Let's take a look at the application scope of the flowering machine. I hope it can help everyone. Flowering machine application scope: Due to the diversity of spinning raw materials, different fiber properties and impurities, the opening process of raw materials is also different. In cotton spinning, the flowering of raw cotton is an independent process, which is carried out on the cotton opening and cleaning machine. When opening raw cotton, additional functions such as mixing, impurity removal and dust removal will be generated. In wool spinning, the opening of wool tops is usually combined with wool washing, drying and wool blending, and wool washing and drying machines and wool blending combined machines are used. In silk spinning, the flowering and impurity removal of fine cotton are carried out during the cotton making process. The opening quality of various fiber raw materials mainly depends on the process. Different raw materials should adopt different process principles. For example, when cotton spinning processes raw cotton, the process principles of loosening first and beating later, more loosening and less, reasonable blows, early falling and less breaking are adopted. When processing chemical short fibers or medium and long fibers, the chemical fiber raw materials are fluffy, free of impurities, and contain only a small amount of fiber defects. Therefore, the process principle of more combing, less beating, less removal, and more recycling is adopted. According to the principle, the opening and cleaning machinery and configuration technology are combined. Raw materials that are packed too tightly and contain too much moisture or impurities should usually be pretreated. Tightly packed raw materials should be pre-flowered, or the packaging should be opened first, and enough time should be given to loosen naturally; raw materials containing too much moisture should be dried before flowering to improve the flowering rate of the raw materials. The above is the application scope of the flowering machine brought to you. I wonder if you have a deeper understanding of this flowering equipment? However, when using the flowering equipment, remember to clean the flowering equipment. Because the fiber material is difficult to clean, it is not only necessary to use it according to the standard, but also to clean the flowering equipment regularly to avoid equipment failure.