How to use the opener correctly? What is the loosening method?

As an important equipment, the opener can be recycled very well. However, since many people do not know and use it, problems may occur, so today, I will tell you how to use the skills correctly. 1. How to use the opener: 1. Everyone knows that you need to wait until the machine is running normally before feeding the machine to ensure continuous and uniform supply. 2. Observe the operation, noise and bearing temperature of the motor during use. 3. When operating the machine, the operator should tighten his clothes and sleeves, wear a mask and a work hat. 4. Check whether the raw materials have hard objects or impurities when adding materials to prevent machine damage and try to avoid accidents. 5. If there is equipment failure, it needs to be stopped before processing. Its beating process is to untie the fiber material and remove impurities in the fiber material, helping more and more users save widely used raw materials. So what is the beating method? 2. Beating method of the opener: The blade, blade, corner nail or needle teeth on the high-speed rotary hammer of the machine can also pierce the fiber layer for combing during the beating and feeding of the fiber material. According to the manufacturer, it can break the continuous connection between the fiber and the impurities, further loosen the fiber and remove impurities. The fiber blocks after pulping can be broken into small pieces, a small amount of impurities can be processed, and the semi-finished product structure can be changed. According to the way the machine feeds the textile material, the unwinding effect can be divided into two forms. One is continuous blowing and the other is free blowing. When the fiber material is slowly fed in a holding state, it is impacted by the high-speed rotating agitator. When the fiber material is fed in a free state and hit by the agitator, it is called free impact. The relevant knowledge about the opener has been explained. Everyone should also use it in a standardized manner during use to ensure their own safety and avoid injury.