How to maintain the opener?

The opener is a machine that uses the centrifugal force generated by high-speed rollers to remove cotton impurities and lift pure cotton fibers. It is equipped with a fan and dust removal system to improve the environmental hygiene of the workplace. It is suitable for processing different levels of cotton, short lint, broken seed cotton, and ancient cotton. All kinds of needle-punched waste materials must be used after opening. With the cotton conveying fan, the high-strength metal teeth are loose, which can directly drive the cotton machine feed bin. It is a device for sparse and impurity removal of fiber raw materials and spinning excellent fine yarn. This machine is equipped with different opening rollers, such as combing needles, sawtooth angle nails, and multiple sets of licker-in rollers. It can be used for opening holes in various materials. For example, chemical fiber, fiber, cotton, wool, dry hemp, waste, rags, etc. It is generally composed of a pair of feeding rollers and a device. It is filled with angle nails, combing needles, needle cloths or porcupines. In order to make the opening more intact, some cylinders are also equipped with working rollers and stripping rollers. There are obvious differences in the opening effect, mixing effect, and impurity removal effect of various structures. Therefore, different production lines should use different types of hole openers. You can also choose appropriate equipment according to the raw materials being processed, and send the opened fibers into the carding machine for processing. Generally speaking, the equipment is of good quality and not easy to be damaged, but daily maintenance is more important. The following is the maintenance of the equipment: 1. Check whether the bearings are lubricated frequently, and oil the bearings frequently to keep them lubricated. 2. Always check whether the transmission belt is intact. If the belt is damaged, please replace it in time. 3. Be sure to check whether the protective device is normal. If the protective device is found to be abnormal, it should be eliminated in time. 4. Always check whether there is any material or debris in the damaged cavity, and clean it up in time. 5. Check the rack and machine fixing screws frequently. Prevent loosening from affecting work. The above is the maintenance method of the opener. We must also perform regular maintenance work when using it, so as to extend its working life and let the opener serve us better.