How should the opener be repaired? See below for details

Economic development has promoted the continuous progress of industry. We all know that there are many kinds of equipment in industry, including can openers. Long-term use will cause failures, and opening equipment is no exception. So when using the opening equipment in normal times, if there is a failure, how should it be repaired? The following brings you the maintenance method of the opener. Let's take a look at it together with this article. Opening maintenance method and steps of the opener Maintenance method: First, check whether the power socket, plug and power cord are deoxidized or damaged. If not, plug in the power and leave the machine. When the motor is powered on and does not rotate, apply pressure to the wind vane. In this case, it is usually necessary to clean the motor after shutdown and power failure. Another situation is that it does not rotate when powered on, but it can rotate when external force is applied, but there is a weak current noise in the motor, which is caused by a slight leakage of the starting capacitor. If the current noise is too large and the motor cannot start at all, it can be concluded that it is caused by a short circuit in the starting capacitor. Maintenance steps: 1. Check whether the bearing is in good lubrication: oil should be added frequently to keep it lubricated. 2. Check whether all fasteners are tightened. Check whether the drive belt is installed correctly and in good condition. If the belt is found to be damaged, it should be replaced in time. When there is oil on the belt or pulley, clean it with a clean rag. 3. Check whether the protective device is intact. If any unsafe phenomenon of the protective device is found, it should be eliminated in time. 4. Check whether there is any material or other debris in the damaged cavity, and remove it if necessary. Prevent fire as unnecessary losses. 5. Check the rack and machine fixing screws regularly. The above is the maintenance method of the opener. I hope it can help you in front of the screen to have a deeper understanding? As a fiber loosening device, the fiber itself is not easy to handle. Therefore, when you use the opening equipment in normal times, you must regularly maintain the opening equipment to extend the service life of the opening equipment.