Basic introduction and features of the flowering machine

The ancient loosening method was manual operation. First, the raw materials to be loosened were torn and shaken by hand, or hit with a stick, or loosened with a bowstring. With the development of the textile industry, the demand for raw materials has increased, and the amount of raw materials that need to be loosened in the production process has also begun to increase. Manual loosening can no longer meet the requirements. Since then, the flowering machine has appeared. The flowering machine is mainly used to relax materials such as fibers, cotton, and textiles. By tearing, the large fibers entangled together will be scattered into small pieces or bundles. At the same time, the loosening process is accompanied by the mixing and removal of impurities. The flowering machine is generally composed of a pair of upper feed rollers or upper feed rollers and a tensioning cylinder. The cylinder is equipped with square nails, combs, needles, clothes and. In order to better relax at the bottom, some cylinders have built-in working rollers and stripping rollers. There are obvious differences in the loosening effect, mixing effect, and impurity removal effect of different structures. Therefore, different production lines need to adopt different forms of flowering machines, and they can also be loosened offline according to the raw material selection, and the loose fibers are put into the combing machine for processing. Due to the different types of textile raw materials, the properties and impurities of the fibers are also different, so the punching process of the raw materials is also different. In the cotton textile process, the punching of raw cotton is a process, which is carried out by a punching machine and a cleaning machine. After the raw cotton is loosened, additional functions such as mixing, impurity removal and dust removal will also be produced. In wool fabrics, the loosening of raw wool is often used in combination with washing, drying and wool, and is used in combination with an open washing and drying machine and a wool machine. In the production of silk textiles, the dry cotton is loosened and removed during the production of cotton. Features of the flowering machine: 1. High strength, compact model and reasonable structure. 2. The transmission parts are all driven by bearings, with low failure rate and stable and reliable performance. 3. The application of serrated rubber rollers does not cut the raw materials, can be fed directly, has a large processing capacity, is loose and clean, and has impurity effects. This is the end of the introduction of the knowledge of the flowering machine, and I hope it will be helpful to everyone. If you want to know more about machinery, please pay attention to the dynamics of our website and look forward to your consultation.