Carding machine 1 set of rollers, rollers, joints but thin belts, oily belts, carding machine bell mouth lifts three flowers and three silks, thick and thin, ③ Carding machine self-stop device stops s to lift thick and thin strips. Carding machines are used to process cotton fibers and chemical fibers and belong to textile machinery. According to the spinning process, carding is an important process.
The front process of the carding machine is the opening and cleaning machine, and the latter process is the drawing frame (carding process) or the sliver coiler (combing process). Grinder A spinning machine that turns fiber strands into rovings. The main function is to draft and twist, and to wind the roving into a certain package to meet the processing requirements of the spinning frame.
During the spinning process of the spinning frame, the semi-finished roving or sliver is drafted, twisted, and wound into a spinning machine. The combed sliver and the needle-carding machine combine the sliver, the needle row is drafted to improve the sliver structure, and the roving is further spun into spun yarn on the ring spinning frame, which is the main spinning machine. Carding machine to prevent mechanical defects) Patrol inspection ① Look at the cotton net, check the mechanical equipment failure, as shown in Table 4-2, observe the abnormal noise in 4-2, check the front teeth, the bed teeth lack oil, heat, etc., 3 rollers, Rolls, rolls, rolls, rolls, rolls, rolls, rolls, rolls, rolls, rolls, rolls, rolls, rolls, rolls, rolls, rolls, etc. 2) Card cleaning inspection ①Drum cleaning skin, top roller eccentricity inspection, bending, hair reward in oil, if the hook falls off the rolling groove, such as the roller system, ②Clean the velvet board, check the velvet puller turn to eat meat' situation, ③L High wash, splash check“From rotating housings and the like.
3) When the situation changes, focus on checking. Turn off the cold car, check the cotton net, leather bed, pressurization, hook tie, and self-stop device. 2 When the naughty rolls off, the whole barrel of naughty rollers should be integrated. After adjustment Carefully check the pressure hook, such as finger diameter Fuppi roller, feel eccentric bending and swinging, ③ broken transmission gear, the whole package of transmission gear should be merged, after the transfer of partial fighting and condensation wool, see uneven yarn sliver, ④ flat wipe the car off, check Part of the drafting system of cotton net, charola, stop loading crabs, check oil stains and whether to wipe brackets, ⑤ process changes and quantities should be modified and broken, check wool, sheep pulling parts, green cotton sliver test to see if they are Able to adapt when winding winding technique.