The company was founded in 1998,  a professional Fabric Recycling Machine Manufacturer in China.


Technical points of safety management and operation of carding machine stoppers

Author:Xinjinlong Machinery-Fabric Recycling Machine Manufacturer

1. When feeding the rolls at the back of the carding machine, the hand should be bent and pushed with the bent part of the fingers, so as to prevent the fingers from being caught in the feeding roller, and to prevent the double-layer lane from being fed, so as to prevent damage to the machine parts. Grinder A spinning machine that turns fiber strands into rovings. The main function is to draft and twist, and to wind the roving into a certain package to meet the processing requirements of the spinning frame.

The structure of the double twisting unit of the double twisting machine mainly includes the spindle braking device, the spindle part of the double twisting machine, the yarn winding device, and the special device of the double twisting unit. Special equipment for the textile industry on the winder. As the last process of spinning and the first process of weaving, winding is the link between the past and the next.“bridge”Therefore, it occupies an important position in the textile field.

2. During the operation of the machine and equipment, students are not allowed to open the needle-copying damper. It is unavoidable to directly touch the doffer with their hands or pick the hanging flowers that are part of the cotton stripping device. 3. When the stripping device of the carding machine fails, the felt should be stopped immediately to avoid damage to the card clothing. 4.

After replacing the cotton lap, replace the cotton lap, do not throw it on the ground, and place it according to the regulations. 5. After the Xinjinlong of the carding machine starts and rotates quickly, the doffer can be driven continuously. When closing the car, the switch should be closed. The machine that is driven by the belt should not hit the control belt on the live disc, and check that the information is correct. After that, you can leave the company machine. 6. The length of the cotton sliver should be broken to within 1 m to prevent safety accidents caused by entanglement of the cleaning parts.

Car 7 cut the abdomen or open the mouthpiece of the abdomen to clean the abdomen, the hands or lifting tools are not too high, and avoid contact with the bottom value of the licker-in or leakage accident. 8. The main cleaning capacity of the carding machine must be carried out after the car is shut down and stopped. Xinjinlong is not allowed to clean the bottom of the range. After 9. the cashmere cloth is damaged, report to the maintenance worker in time to prevent cashmere from entering the machine.

10. When the machine is turning slowly, the strap must be installed. Only a tool can untie the cord.

Hands and feet are not allowed. Those who do not know about loading and unloading operations are prohibited from doing so. 11. The large pressure roller cover is easy to fall off. Pay attention to prevent foot injury during operation.

12. The flower processing unit and cleaning of the Jodolph stripper, the doffer play slow. 13. Machine handles are cleaned to prevent falls and injuries channel Kafka's clothes too. Carrousel tool belt to prevent vice cleaning machine side.

14. The bell mouth of the national strip and the bell mouth of the large pressure roller are blocked, the small pressure series is wound, the apron or leather stick is wrapped around the flower, and the two ends of the apron are stuffed with flower elbows, which must be dealt with after the automatic stop of the doffer. For example, when the flag is lifted to operate the coiler, it is necessary to strictly prevent the sleeve from the back of the finger into the center of the gear (the small pressure roller stops automatically when the 1181 type coiler cover is lifted). 15. Continue to patrol and check to prevent sundries in the lap from being fed and accidents before the flowers are returned to the machine.

16. The automatic stop device for carding machine breakage should be used carefully to prevent the card clothing from being crushed.


cotton fabric waste recycling machine

Carding Machine Manufacturer

Fabric Waste Recycling Machine

Baling Machine Manufacturer

Cotton Cleaning Machine

Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Қазақ Тілі
Current language:English