In cotton mills, the safe production of carding machines should be a very important thing. Carding machines are used to process cotton fibers and chemical fibers and belong to textile machinery. According to the spinning process, carding is an important process.
The front process of the carding machine is the opening and cleaning machine, and the latter process is the drawing frame (carding process) or the sliver coiler (combing process). Grinder A spinning machine that turns fiber strands into rovings. The main function is to draft and twist, and to wind the roving into a certain package to meet the processing requirements of the spinning frame.
Special equipment for the textile industry on the winder. As the last process of spinning and the first process of weaving, winding is the link between the past and the next.“bridge”Therefore, it occupies an important position in the textile field. Due to the high-speed reversal of the carding machine with drums, doffers and drums, which are covered with carding cloth or saw blades, the transmission belt (slow speed) or rope is often exposed, and the needle surface is still exposed for a short time. Under this operating condition, the manuscript is careless , that is, an accident, or even a serious accident.
Therefore, in order to ensure safe production, operators must understand the safety of this process, carefully implement safe operating procedures, and strictly abide by various safety guidelines. The main dangerous parts of the card are as follows: 1. The feeding roller is empty, the hand is on the knee to the feeding roller when the cotton stalk is fed, and special attention should be paid not to be touched by the pressure level of the feeding roller. 2. The punch roll does not stop before the licker-in, the licker-in cover cannot be opened, the car cannot be opened by the abdomen flap cleaning process, the recipient or the piercing roll adjacent to the injury and disease.
3. The front wing copy of the cylindrical pin does not completely stop the cylinder, and the cylinder cannot be opened. 4. When the outer doffer is ground outside, use the target pulling force of stripping, not directly peel off with your fingers, so that the inner doffer squeezes the finger crochet cover. 5. The car of Doffer stripping device does not stop, do not remove.
Wrong, wrong, injury treatment to prevent clothing or crushed fingers. 6. Cylinder side air valve; in normal automobile production, it is necessary to close the good shock absorber side, which can not only achieve smooth airflow, but also ensure safe production. Working here generally requires the cylinder to be stopped.
7. The sliver channel of the coiler is a part of the website. The top of the cover is often cleaned. The thing to pay attention to is to look at the flowers and do not touch the sliver, so as not to increase the yarn defects that affect the quality. And avoid the drawbar in the country where things like hair or sleeves form a troublesome strip coiler. 8. The combing transformation of electric motor and drive belt rope and other parts should be checked before driving safety guard has been installed.
If there are no specially trained workers, live in dedicated lines for loading and unloading belts and ropes while driving. During operation, these risk parts should be kept on high alert to avoid trouble. Website keywords: Carding line card box quilt.
cotton fabric waste recycling machine
Fabric Waste Recycling Machine