Card separation roller

According to a separation device in the main body of the card to separate the engaging mechanism, its function is to complete a new separation of the female and edge overlapping continuous output into the network, therefore, the separation roller rotation is inverted one-by-one static reciprocating motion, And the reverse is larger than the order. Special equipment for the textile industry on the winder. As the last process of spinning and the first process of weaving, winding is the link between the past and the next.“bridge”Therefore, it occupies an important position in the textile field.

During the spinning process of the spinning frame, the semi-finished roving or sliver is drafted, twisted, and wound into a spinning machine. The combed sliver and the needle-carding machine combine the sliver, the needle row is drafted to improve the sliver structure, and the roving is further spun into spun yarn on the ring spinning frame, which is the main spinning machine. The structure of the double twisting unit of the double twisting machine mainly includes the spindle braking device, the spindle part of the double twisting machine, the yarn winding device, and the special device of the double twisting unit. The carding machine separates the roller 1) The carding machine mainly separates the transmission system mechanism of the roller. On the A201C type comber, multi-linkage can be used to carry out the plane design movement of the mechanism and the transmission control mechanism that combines the internal gear and the gear train. As shown in Figure 6-13.

2. During the revolution of the freighter ZA, the eccentricity of the Xinjinlong shaft k affects the cam H, (that is, the cam H is a moving spoon to remove the driving gear train, and the rotation comes from the composite material movement of the multi-link working mechanism A-B-C-D-E-F-G-H. The revolution and rotation directions of the self-wheel ZA are synthesized and then transmitted to the internal gear Z.o and then separated into rollers by the gear train transmission technology, so that the separated rollers produce time reversal, clockwise rotation and stationary in one economic cycle. 2) Effectively control the length of the output data. In an enterprise working cycle, after the reverse rotation of the gear ZR is offset, the actual angular displacement of the rotation is converted into the linear displacement of the separated roller, which is the effective information output of the comber. Different lengths .

In one working cycle of the carding machine, the eccentric distance of the original eccentric cam h is 10 mm, the number of teeth is 10, and the effective output length is 46.5 mm. When the eccentric cam to the eccentric H of 8mm, the ZA flute 69 to the rear 67 teeth, one operating cycle, the actual clockwise ZS turn round window exposure flute is 8,37.2mm effective output stiffness.

cotton fabric waste recycling machine

Carding Machine Manufacturer

Fabric Waste Recycling Machine

Baling Machine Manufacturer

Cotton Cleaning Machine