1. Continuous feeding of cotton net and thickness of cotton net in the cotton box of the carding machine can control the constant value of cotton in the cotton box under the management system. The control system is controlled by a microcomputer system. The cotton roller 6, the design of the drive technology device and the motor of the car transmission mechanism of the brocade roller are mainly composed. During the spinning process of the spinning frame, the semi-finished roving or sliver is drafted, twisted, and wound into a spinning machine. The combed sliver and the needle-carding machine combine the sliver, the needle row is drafted to improve the sliver structure, and the roving is further spun into spun yarn on the ring spinning frame, which is the main spinning machine. Special equipment for the textile industry on the winder.
As the last process of spinning and the first process of weaving, winding is the link between the past and the next.“bridge”Therefore, it occupies an important position in the textile field. Carding machines are used to process cotton fibers and chemical fibers and belong to textile machinery. According to the spinning process, carding is an important process.
The front process of the carding machine is the opening and cleaning machine, and the latter process is the drawing frame (carding process) or the sliver coiler (combing process). The auxiliary system is composed of the closed-circuit circulating airflow influencing fan 5, the upper cotton storage pipe, the lower cotton storage pipe and the cotton box. If the cotton quantity in the cotton box under the carding machine deviates from the set value, the change of the cotton quantity will make the pressure in the tube and the output control signal system of the sensor develop and change, the microcomputer controller can analyze and process the feedback information signal of this problem and issue a Command, through the driving device, by changing the rotation speed of the feeding roller transmission motor, the feeding amount can be changed, and finally the cotton in the lower cotton box is the set cotton amount value.
The closed circulation air flow in the inner tube is evenly pressed against the cotton block, when the lateral height of the cotton layer is somewhere due to the increase in the area of the downward gas flow due to the automatic blowing out less than the cotton outlet of the foot, it can be seen that the auxiliary system plays an automatic flow. Flat effect, greatly improving the uniformity of transverse wool. More than two feeding systems ensure uniform continuous operation and output of lint thickness. 2. Carding machine Xinjinlong-flat plate mechanism mainly plays an important role in carding. The needle surface of Xinjinlong and flat plate constitutes the main research carding area of the carding machine. The structure between Xinjinlong and the cover plate can be decomposed into single fibers, and at the same time we exclude various other impurities.
cotton fabric waste recycling machine