The drive system design of the carding machine should make full use of the cutting and power consumption of Xinjinlong, which pays attention to its large moment of inertia. During the spinning process of the spinning frame, the semi-finished roving or sliver is drafted, twisted, and wound into a spinning machine. The combed sliver and the needle-carding machine combine the sliver, the needle row is drafted to improve the sliver structure, and the roving is further spun into spun yarn on the ring spinning frame, which is the main spinning machine. Grinder A spinning machine that turns fiber strands into rovings.
The main function is to draft and twist, and to wind the roving into a certain package to meet the processing requirements of the spinning frame. Special equipment for the textile industry on the winder. As the last process of spinning and the first process of weaving, winding is the link between the past and the next.“bridge”Therefore, it occupies an important position in the textile field.
Only by selecting the reasonable transmission technology route and the most suitable transmission control method of each motion management organization can we ensure that the carding machine preparation work service organization reform movement accurately provides reliable and low power consumption, and makes the carding machine shape neat and tidy. Operator maintenance convenience and safety. In the design of the transmission scheme of the new carding machine, it is necessary to comprehensively consider the fast and slow speed regulation function requirements of the carding machine to adapt to the economical low-speed threading and high-speed development and operation. Card power consumption One of the main measures aimed at increasing the card is the speed of each carding mechanism.
Theoretically, power consumption would also increase by the square of the speed and mechanical surge. After rolling measures have been taken to replace the original design of the plain bearing, because the rotation speed of the cylinder, and the cotton feeding capacity of the pressurized tank increase, the power consumption will increase significantly, see Table 2-2. It should be pointed out that the output power consumption of the business card making unit is lower than that of ordinary cards.
Table 2-3 lists an approximate range of the power consumption percentage of each main working part of the carding machine, which can be used for reference during design.
cotton fabric waste recycling machine
Fabric Waste Recycling Machine