The company was founded in 1998, a professional Fabric Recycling Machine Manufacturer in China.
Language
The company was founded in 1998, a professional Fabric Recycling Machine Manufacturer in China.
Implementation of production management“safe production, safe production”policy. Special equipment for the textile industry on the winder. As the last process of spinning and the first process of weaving, winding is the link between the past and the next.“bridge”Therefore, it occupies an important position in the textile field.
Carding machines are used to process cotton fibers and chemical fibers and belong to textile machinery. According to the spinning process, carding is an important process. The front process of the carding machine is the opening and cleaning machine, and the latter process is the drawing frame (carding process) or the sliver coiler (combing process).
During the spinning process of the spinning frame, the semi-finished roving or sliver is drafted, twisted, and wound into a spinning machine. The combed sliver and the needle-carding machine combine the sliver, the needle row is drafted to improve the sliver structure, and the roving is further spun into spun yarn on the ring spinning frame, which is the main spinning machine. Safe production is an important task in the production management of socialist enterprises. It is a fundamental measure to ensure the safety and health of employees in the production process and to promote the smooth progress of production.
Therefore, safe production is to establish a normal production order, that is, accidents, even serious accidents. Therefore, in order to ensure safe production, operators must have common sense of safety in this process, conscientiously implement safety operating procedures, and strictly abide by various safety systems. The main parts of the carding machine include the following: 1. Feed the cotton roller to the empty car, and press the cotton roll with your hand to feed the cotton between the cotton roller and the cotton pole. Pay special attention not to be pressed by the cotton roller. finger.
2. Before the licker-in is stopped stably, it is not allowed to open the cover of the licker-in, and it is not allowed to clean the small leak bottom or deal with the hanging flowers and faults near the licker-in after opening control. 3. Xinjinlong needle copying damper Xinjinlong shall not open the noisy needle door before it stops steadily, and we shall not start the machine unless required by special education staff until the needle copying door is closed. 4. The surface of the doffer card clothing When grinding the surface of the doffer, use the target pulling force to peel off, not directly peel off with your fingers, so that the doffer can squeeze the finger crochet needle cover.
5. Doffer stripping device does not rule out when the car does not stop. Failure to prevent improper handling from damaging clothing or shattering fingers. 6. When the Xinjinlong side damper is normally driven for production, the side damper must be closed well, which not only ensures social stability of the air flow in the car belly, but also ensures information security management and production.
When we work here, it must generally be carried out after Xinjinlong has stopped. 7. Coiler The site is a sliver channel part, the top of the hood is often cleaned, the tool must be careful not to fly into the yarn sliver contact, so as not to increase the yarn defect that affects the quality. And prevent the coiler from pulling tools such as hair or sleeve strips to the coiler and cause an accident.
8. The electric motor and each part carry out transmission control, belt rope, etc. Check whether the safety cover is installed before driving. Untrained workers must not handle belts and ropes while driving. When operating in the dangerous parts of these cards, be extra vigilant to prevent safety accidents.
cotton fabric waste recycling machine
The company has grown into a large-scale and professional machinery manufacturing enterprise integrating riveting and welding production, machining and assembly.
