Mixtures, cotton machinery can be classified into two categories: one is the mechanical hopper, which will be divided into a mixer with the main function of blending and the homogeneous function to the cotton-based double hopper with cotton, their hoppers have large mechanical and The spikes, with a large hopper where the raw materials are mixed, use a grid for timing members, the free openings by beaters, tearing corners etc. to remove dust. During the spinning process of the spinning frame, the semi-finished roving or sliver is drafted, twisted, and wound into a spinning machine. The combed sliver and the needle-carding machine combine the sliver, the needle row is drafted to improve the sliver structure, and the roving is further spun into spun yarn on the ring spinning frame, which is the main spinning machine. Special equipment for the textile industry on the winder.
As the last process of spinning and the first process of weaving, winding is the link between the past and the next.“bridge”Therefore, it occupies an important position in the textile field. Carding machines are used to process cotton fibers and chemical fibers and belong to textile machinery. According to the spinning process, carding is an important process.
The front process of the carding machine is the opening and cleaning machine, and the latter process is the drawing frame (carding process) or the sliver coiler (combing process). Impurities, use the internal cotton wool of this control unit to achieve uniform feeding. Other products that are excluded from the multi-head mixer, have a very important role in the uniform, stable quality and its strict levelness of the gauze.
1. Cotton box machinery This type of machine includes automatic cotton blending machine and double cotton box feeding machine. Generally speaking, the former is mainly mixed products, close to the cotton feeding machine, and the latter is developed evenly for its main functions and positions. Lord, near the rolling machine. The structure of the cotton box machinery: as shown in Figure 1. A006BS, CS automatic agitator structure, controlled cotton flow by natural cotton feeding photocells 3-4, 7 through condenser, swing arm falls between two metal fins 10 due to flaps, in a horizontal cross cotton block The swinging silver-plated shade 8, the multi-layer stack of blended cotton, the cotton horizontal curtain 6 and the stack gradually compress the cotton at the same speed, pressure, and hold, feed longitudinally into the lattice 4, and then convey it upward to the nip at the same time as The same rate as the poor cotton curtain and the pressure of the nail curtain, has a tearing effect on the beard in the process.
The spiked lattice is driven up to 5:00 by the block cotton cotton roller, because both are traveling in opposite directions, so the cotton and tearing purpose hits the block of action, and the block hits back the excess pressure cotton curtain, hopper, and back To cotton pile mix. Adjusting the peg curtain and spacing the cotton away from the roll, the cotton output can be changed. Brad Front Curtain Bundle Peeler Beater 2 can nail the curtain peeler and hit the stripper beater dust on the perimeter of the grid 3, a part of larger impurities is thrown.
After being torn against the action of inhaling air flow in front of the output, the small beard. For A006BS type, there are 2 vertical modes using cotton to adjust the partitions. If the cotton is recruited, the output stripper beam from the beater below the cotton, through the magnet device 1, after removing the iron heteroaryl portion, the machine is stepped down.
Type concerns for the A006CS are out of the only way to a cotton, non-magnetic device. The hopper 9 is photoelectric, sensitive and reliable for fast operation. It is used to control the car to stop and keep the storage stability of the cotton box, which is conducive to the stability of the cotton nail curtain and the uniform output of cotton. 2. The structure design of A092AST (FA046A) double-box cotton feeder is shown in Figure 373-5.
The cotton flow is usually controlled by the rear photocell, and is fed into the rear cotton storage box 11 through the cotton condenser. The adjustment plate in the box can adjust the cotton box capacity to suit the output of a machine in front of us. Photocell 2 can control the opening and closing of the cotton inlet valve of the cotton distributor to keep the cotton quantity in the environmental box stable. The call-out roller 10 is controlled by the rocking plate 12 to convey or stop the raw cotton to the middle cotton storage box 8 .
The cotton feeding curtain 9 of the middle cotton box transports the raw cotton forward, and the braided nail curtain 5 is dragged upward, and is torn by the equalizing roller 6, and is peeled off by the cotton stripping hand 4, evenly fed into the vibrating cotton box, and then by the students. The output is divided into roller 1 and sent to the coiled sail. The function of the cleaning roller 7 is to remove the raw cotton remaining on the uniform roller.
cotton fabric waste recycling machine