The company was founded in 1998, a professional Fabric Recycling Machine Manufacturer in China.
Language
The company was founded in 1998, a professional Fabric Recycling Machine Manufacturer in China.
With the various components of raw cotton, flower back, and then between cotton, very different densities, cotton carding will affect the density balance of the barrel, the lower layer of cotton, and the cotton output is unbalanced, therefore, the carding bale alignment device must be considered with reasonable The size of the density of the bale, the bale must be the same composition as the dispersion shift, a good tight cotton throw first pre-loose back embroidery, then the cotton bale is compressed and used in a predetermined ratio. Carding machines are used to process cotton fibers and chemical fibers and belong to textile machinery. According to the spinning process, carding is an important process.
The front process of the carding machine is the opening and cleaning machine, and the latter process is the drawing frame (carding process) or the sliver coiler (combing process). The structure of the double twisting unit of the double twisting machine mainly includes the spindle braking device, the spindle part of the double twisting machine, the yarn winding device, and the special device of the double twisting unit. Grinder A spinning machine that turns fiber strands into rovings.
The main function is to draft and twist, and to wind the roving into a certain package to meet the processing requirements of the spinning frame. The bag is set flush, so that's all the beater is able to climb to each component. Tenders should be properly adjusted in pounds, and volumetric weighing records track lap weight changes to control progress.
Qin Zi should master a solid iron cannon and pull the operation of the mechanism. The method of calibrating the fulcrum by the optimization method is: according to the limit working position of a fulcrum, a long court can be selected as a preferred research range, and the following factors are found in advance according to the optimization method. Machine roll, through the test unevenness rate on the cotton lap uniform skin test computer, for management and comparison, the most suitable fulcrum position can be selected. 1. If the monitor changes the adhesion layer, one shift position of the balance weight, high-density persimmon layer (eg, with tighter terror), lap stress, weight shift direction 2 The position should climb traditional The hook (ie, right), the density of the batting is small, the lap is lighter, and the weight is adjusted in the direction of the linear screw (ie, the left).
2. When relying on market adjustment and screw rods, it may not be possible to adjust the iron bag belt to the proper position. When set, the pegable earthworm modulation undoes the climb to adjust the balance on the lily to change the balance position of the rod, paying attention to the position of the hook groove climbing the strap at the edge of the positive balance adjustment rod.
cotton fabric waste recycling machine
The company has grown into a large-scale and professional machinery manufacturing enterprise integrating riveting and welding production, machining and assembly.