The company was founded in 1998, a professional Fabric Recycling Machine Manufacturer in China.
Language
The company was founded in 1998, a professional Fabric Recycling Machine Manufacturer in China.
The roof output part of the FA261 carding machine is shown in Figure 3-39. During the spinning process of the spinning frame, the semi-finished roving or sliver is drafted, twisted, and wound into a spinning machine. The combed sliver and the needle-carding machine combine the sliver, the needle row is drafted to improve the sliver structure, and the roving is further spun into spun yarn on the ring spinning frame, which is the main spinning machine. Carding machines are used to process cotton fibers and chemical fibers and belong to textile machinery.
According to the spinning process, carding is an important process. The front process of the carding machine is the opening and cleaning machine, and the latter process is the drawing frame (carding process) or the sliver coiler (combing process). Special equipment for the textile industry on the winder.
As the last process of spinning and the first process of weaving, winding is the link between the past and the next.“bridge”Therefore, it occupies an important position in the textile field. After the cotton web is output by the separating roller 1, due to the guidance of the guiding roller 3, the cotton web is sent from the cotton web support plate 2 to the bundled cotton web support plate 4, and the cotton web is assembled downward through the support collector 4 and the bell mouth 5 The sliver is then output by a pair of guide rollers 6 and bypasses the guide stud 90°After a turn, eight slivers enter the drafting device side by side on the car surface. The part from the cotton web output to the drafting mechanism device is called the car surface output part.
Due to the periodic junction of the Chinese separation whiskers, there is often uneven thickness at the overlap, which causes a periodic uneven wave in the output cotton web. When the cotton is bundled and packed to the collector on the cotton mesh pallet, there is a certain uniform material mixing and other effects. The collector is biased towards the students and has a "uniform compensation mechanism". The merging of the eight slivers on the turning surface can improve the economic cycle. For example, by adjusting the position of the guide studs reasonably and effectively, the joints of the eight turning noodles can be evenly staggered, which is beneficial to further development. It has a certain effect on improving the evenness of the combed sliver.
The rollers in the car surface output management mechanism are guided out so that the separation is divided into rollers as the output cotton webs are not immediately formed into strips, and the cotton webs can be rapidly developed and conveyed in a forward and reverse direction through a section of slack zone without destroying the cotton web formation. It is beneficial for enterprises to improve the structure and uniformity of the combed sliver. The current collector has a diameter of 4, 4.5, 5, 5.5, 6, 6.5 {mm) several, and the vehicle can be selected according to the thickness of the noodles.
cotton fabric waste recycling machine
The company has grown into a large-scale and professional machinery manufacturing enterprise integrating riveting and welding production, machining and assembly.
